Rosslare MD-D02B Expansion Board
Rosslare MD-D02B Expansion Board
Description
The Rosslare MD-D02B Expansion Board is a module expansion with two readers for the Rosslare AC-225x-B access control panel. The Rosslare MD-D02B Expansion Board provides an interface for two readers, four monitored inputs with end-of-line (EOL) protection resistors, and four Form-C N.O./N.C. relay outputs to the panel. The 2-reader expansion module from Rosslare is designed for high-quality and reliable products, ideal for residential and commercial applications.
The Rosslare MD-D02B Expansion Board is easy to install and operate. It is a plug-in module that can be installed in the AC-225x-B panel within less than one minute. The expansion board automatically recognizes the panel and can be programmed to control access and automation. Advanced communication with the controller allows firmware updates and real-time event logging, supporting offline operation by the host panel.
The Rosslare MD-D02B Expansion Board can add two additional readers or keypad inputs to the Rosslare AC-225x-B panel. Additionally, it can be used to add four monitored inputs and four relay outputs to the panel. As a result, an access control panel with the MD-D02B expansion module can support up to four readers and four doors. Furthermore, the Rosslare MD-D02B Expansion Board is compatible with various Rosslare door controllers for single-door, dual-door, or multiple-door applications, as well as third-party access control devices.
The Rosslare MD-D02B Expansion Board is a versatile, reliable, and user-friendly module. The MD-D02B expansion board can be used to expand the capabilities of the AC-225x-B access control panel. The MD-D02B expansion board is an invaluable tool for businesses and organizations that need to enhance their building security.
If you are looking for a versatile, reliable, and user-friendly module for your Lumbatech access control system, then the Rosslare MD-D02B Expansion Board is the right choice.
Features
Rosslare MD-D02B Expansion Board Features
- Additional two proximity readers or keypads
- Four relay outputs and four supervised inputs to the access control panel
- Wiegand or Clock-and-Data transmission keypad or biometric reader compatibility
- LED status feedback for 12 V power and relay activation
- Cost effective and modular installation
- Input and output configurability using Rosslare’s AxTraxNG® software
Specifications
ELECTRICAL SPECIFICATIONS
Input Voltage 12 VDC from host controller
Input Current (not including devices) Standby: 30 mA; Maximum: 135 mA
Number of Reader Ports 2
Number of Inputs 4
Output Relays 4 x 5 A with N.O., N.C. and COM contacts Form-C Relays
Inputs Voltage 5 VDC maximum voltage
INPUT SPECIFICATIONS
Input Type
Selectable: Normally Open, Normally Closed, Supervised with one resistor (three states, normally open or normally closed), Supervised with two resistors (four states, Normally Open or Normally Closed).
READER SPECIFICATIONS
Reader Output Voltage 12 VDC
Maximum Reader Current 300 mA
LED Control Output Open collector, active low
Tamper Input 5 VDC maximum voltage
Supported Formats Various, please refer to the AxTraxNG software manual
LED INDICATORS
Power LED Active when connected to a power source
Output LEDs Four LEDs, each output LED is active when an output relay is activated and N.O. to COM contacts are shorted
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H) 100 x 75.9 x 32.5 mm
Weight 98.2 g
SYSTEM COMPONENTS
Rosslare MD-D02B Expansion Board kompatibel dengan berbagai controller single/double/multi-door Rosslare, berbagai keypad dan reader biometrik yang mendukung format transmisi Wiegand atau Clock-and-Data, serta dengan banyak unit akses kontrol pihak ketiga.